Table of Contents
Advertisement
Network Connection & Setup
Searching for SNT-1010
IP Installer screen layout
1
2
3
1
<Device Name> : Model name of SNT-1010.
2
<Mode> : Shows the current selection among from <Static>and <Dynamic>.
3
<Mac Address> : The Mac address of the network interface of SNT-1010 that is printed on the rear panel.
4
<IP Address> : The IP address of SNT-1010.(Default setting is '192.168.1.200'.)
5
<UPnP Status> : The SNT-1010 on which the automatic port mapping (port forwarding) is done using UPNP
is marked with <Success>.
<URL> : This is an DDNS URL address that can be used to connect from an external Internet.
6
However, if the DDNS fails to register with your PC, it will be displayed as an IP address of
SNT-1010.
7
[Search ] Button : Searches for SNT-1010 connected to the current network.
8
[Auto Set ] Button : Sets up the SNT-1010 network settings automatically using the <IP Installer>.
9
[Manual Set ] Button : Allows the user to set up the SNT-1010 network settings manually.
10
[Exit ] Button : Exits the IP Installer program.
32
(Continued)
4
5
6
7
8
9
10
Static IP Setting
Manual Network Setting
Run the <IP Installer.exe> program and display the found SNT-1010 list on the screen.
Before You Start!
For the initial run,the [Auto Set] and [Manual Set] button are all disabled.
1
3
3
2
1
Select an SNT-1010 you want from the SNT-1010 list.
Confirm the MAC Address of the SNT-1010 on its rear panel.
The [Auto Set] and [Manual Set] button are activated.
2
Click the [Manual Set] button.
The Manual Set window appears.
The <IP Address>, <Subnet Mask>, <Gateway> and
<HTTP Port> values of the SNT-1010 are displayed in
their default values.
The password is set to 4321 by factory default.
3
Set up the IP related settings in the <ADDRESS>field.
<MAC Address> : The MAC Address printed on the
SNT-1010 rear penal is automatically displayed.
No additional setting is required.
<If using an IP sharer>
<IP Address> : Set it according to the private IP
address range provided by the IP Sharer.
ex) 192.168.1.2~255, 192.168.0.2~255,or
192.168.XXX.2~255
<Subnet Mask> : The IP Sharer's <Subnet
Mask>becomes SNT- 1010's <Subnet Mask>value.
<Gateway> : The IP Sharer's <LAN IP
Address>becomes SNT-1010's <Gateway>value.
<If not using an IP sharer>
For the <IP Address>, <Gateway> and <Subnet Mask>
settings, contact your network administrator.
33
Advertisement
Table of Contents
