Table of Contents
Advertisement
Push2TV HD TV Adapter for Intel® Wireless Display User Manual
Opening Intel Wireless Display on the Laptop
To open Intel Wireless Display, click the Windows Start icon on the laptop's taskbar. Type
Intel Wireless Display into the search field. In the search results click Intel Wireless
Display. If an auto-connect adapter is set up, the application tries to connect to it (see
on page 13).
Up Autoconnect
Some laptops have a button or key that starts Intel Wireless Display. This key is located in
different places depending on the laptop. It is usually on or around the keyboard. The key has
a small version of this symbol.
During the initial set up you might see a firewall alert message, and the license agreement
displays.
Firewall alert. In the initial set up, a firewall might block Intel Wireless Display, and a
•
firewall alert message might be displayed. If this happens, make sure to allow access for
both private and public networks. For firewall help, see
your firewall's user manual.
License agreement. After reading and agreeing to the license agreement, click the I
•
agree to the terms of this license button and proceed to the next screen. If you do not
agree to the terms of the license, click the I do not agree button. You will not be able to
continue and the application will close.
At this point, the TV status reads Ready for connection.
Scanning and Detecting Adapters
When you open the Intel Wireless Display
application, it scans for a Push2TV HD Wireless
Adapter. The status shows Scanning for adapters.
Note:
If you set up auto connect, the
application automatically tries to connect to
your adapter when it is detected. See
Up Autoconnect
If the application does not automatically begin
scanning, click the Scan for available adapters
button.
Setting
on page 13.
on page 21 or see
Firewall Issues
Chapter 1. Getting Started
Setting
| 7
Advertisement
Table of Contents
