Table of Contents
Advertisement
Wireless Display Settings
2.
After you install the Push2TV HD Wireless Adapter, you can adjust the settings.
Changing the Display Language
To change the adapter display language, use the Restore Factory Settings button located on
the bottom of the adapter.
Figure 1. Cycling through display languages
CAUTION:
Pressing the Restore Factory Settings button for more than 5 seconds
erases the adapter setup. See
To change the adapter's language display:
While the adapter is turned on and the Push2TV HD menu is displayed on your TV, tap
1.
the Restore Factory Settings button.
The language display on the TV changes.
To step through the language selections, tap the Restore Factory Settings button
•
for less than 0.5 seconds.
To go back to the previous language selection, press the Restore Factory Settings
•
button for more than 0.5 second and less than 5 seconds.
When the correct language is displayed, release the Restore Factory Settings button.
2.
Restoring Factory Settings
Chapter 2. Wireless Display Settings
2
in Appendix A.
| 10
Advertisement
Table of Contents
