Table of Contents
Advertisement
Push2TV HD TV Adapter for Intel® Wireless Display User Manual
Initial Setup
Adapter Power Does Not Turn On
The On/Off button is located on the rear of the adapter.
On/Off
Figure 1. On/Off button
If the adapter is not turning on, make sure the power cord is pushed all the way into both the
wall outlet and the adapter. If power is not getting to the adapter, there might be a faulty
power cord.
Changing the TV Input
Different TV brands have various methods of changing the TV input. Five of the most
common processes are covered here. If these options do not cover your TV, consult your TV
owner's manual for additional help.
Some TV remote controls have buttons labeled HDMI, HDMI 1, HDMI 2, A\V, and so on.
•
Press the appropriate button to choose the TV input.
Other TV remote controls include a button labeled Input, Source, TV, or TV/Video. Press
•
this button to cycle the TV through the input options.
Pressing the Input button on some remote controls results in a list of inputs on the TV
•
screen. Simply select the input that you want.
You select the input on some TVs by pressing the Input button on the front or side panel
•
of the TV screen. Simply press the button until the input that you want is selected.
Sometimes the inputs are located beneath the regular channels on the TV. Try selecting
•
the lowest TV channel and then go down one channel.
Adapter Encountered a Problem on Startup
The adapter is experiencing technical difficulties. First turn the adapter off and back on again.
If this does not resolve the issue, see
on page 6.
Adapter Label
Chapter 3. Troubleshooting
| 19
Advertisement
Table of Contents
