Accessories - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual

Accessories

Table 3-3
Steady state
Maximum peak
Maximum heat dissipation
Environment
Temperature
Relative humidity
Altitude
Shock
Vibration
Acoustic noise
Only one PCI expansion slot can be used for the 4FE card. We recommend you install the 4FE card in
Note
the lower PCI expansion slot.

Accessories

Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
IDS-4215 accessories kit contains the following:
•
•
•
•
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
3-4
IDS-4215 Specifications (continued)
DB25F/RJ45F adaptor
DB9F/RJ45F adaptor
Rubber mounting feet
Rack mounting kit—screws, washers, and metal bracket
50W
65W
410 BTU/hr, full power usage (65W)
Operating +41°F to +104°F (+5°C to +40°C)
Nonoperating -13°F to +158°F (-25°C to +70°C)
Operating 5% to 95% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)
Operating 1.14 m/sec (45 in./sec) 1/2 sine input
Nonoperating 30 G
0.41 Grms2 (3-500 Hz) random input
54 dBa maximum
Chapter 3 Installing IDS-4215
78-16124-01