Adjusting The Lcd Contrast; Initializing The Menu Settings; Checking The Firmware Version - Yamaha PocketrakCX - POCKETRAK CX 2 GB Digital Player Reference Manual

Adjusting the LCD contrast

You can adjust the LCD contrast on a scale of ten (10).
1.
Press the [MENU/ENTER] button for at least two (2) sec-
onds while the main screen is displayed, press the [VOL
+/-] buttons to select [COMMON MENU] → [CON-
TRAST], then press the [MENU/ENTER] button.
2.
Press the [
then press the [MENU/ENTER] button.
L (low): 1 – H (high): 10

Initializing the menu settings

Initializing the recorder settings will restore all menu settings (excluding the date and time set-
ting) to the factory default.
Note:
· Initializing the recorder settings will not delete any data on the microSD card. For infor-
mation on initializing a microSD card, refer to
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, press the [VOL +/-] buttons
to select [COMMON MENU] → [MENU RESET] → [YES], then
press the [MENU/ENTER] button.
If you decide not to initialize the settings, select [CANCEL].
Checking the firmware version
You can check the version number of the recorder's firmware by following the procedure below.
Procedure:
Press the [MENU/ENTER] button for at least two (2) seconds
while the main screen is displayed, press the [VOL +/-] buttons
to select [COMMON MENU] → [VERSION], then press the
[MENU/ENTER] button.
The firmware version will be displayed.
POCKETRAK CX Reference Manual
]/[ ] buttons to adjust the contrast,
page 46.
About the Menu Settings
53