Vas (Voice Activated System) Recording; Setting The Voice Sensing Level (Vas Value) - Yamaha PocketrakCX - POCKETRAK CX 2 GB Digital Player Reference Manual

VAS (Voice Activated System) recording

When the VAS recording function is turned on, if the unit is in recording pause mode, the unit
will automatically start to record as soon as it detects audio at a level above a certain threshold.
The unit will pause recording when the detected audio level falls below the threshold. VAS
recording is available only when ALC is set to ON.
Note:
· Audio at a level below a certain threshold will be undetected and will not be recorded. If
you are planning to record important audio, set the VAS recording to OFF.
1.
Press the [MENU/ENTER] button for at least two (2) sec-
onds while the main screen is displayed, select [REC
MENU] → [VAS] → [ON], then press the [MENU/ENTER]
button.
2.
Press the [STOP/ESC
"VAS" will appear on the main screen.
3.
Press the [REC/PAUSE
As soon as the unit detects audio, recording begins.
If the unit does not detect any audio, the elapsed recording
time indicator and the VAS indicator will flash, and the unit
will enter Recording Pause mode.
Note:
· If the recorder does not detect any audio or does not pause recording, adjust the
threshold by following the procedure in the "Setting the voice sensing level (VAS value)"
section below.
· If you start recording while the VAS function is turned on, the first two seconds or so will
be recorded with no exception.

Setting the voice sensing level (VAS value)

You can adjust the voice sensing level in five steps (1-5) to accommodate the source
volume level. A larger value will increase the voice activation sensitivity so recording
will be triggered by lower-level audio. If the value is too small, the recorder may not
detect audio. Set the microphone sensitivity (see
source input level so that the VAS function can work more effectively.
Procedure:
To adjust the voice sensing level, press the [
while recording with the VAS function turned on.
Note:
· If the High Pass Filter is turned on, the filter will cut the low range, and recording may
not start. In this case, set the VAS function to Off.
POCKETRAK CX Reference Manual
] button twice.
] button.
page
]/[
Recording Settings
VAS indicator
10) in accordance with the
] buttons
VAS value
22