Table of Contents
Advertisement
3
Installing the UC 540
Before you install the UC 540, review the
Safety Information for Cisco Unified Communications 500 Series for Small
Business
on your product CD.
Only install supported Voice Interface Cards (VICs) into the VIC
N
OTE
expansion slot of the UC 540. For a list of these cards, see the
Cisco Unified Communications Model UC 540 System Reference
Guide.
Placement Tips
• Wireless Installation—Place the device in the center of your office
space so that there are no obstructions. The embedded access point
recommended coverage area is 2,500 sq. ft. /232 ms.
• Ambient Temperature—To prevent the device from overheating, do
not operate it in an area that exceeds an ambient temperature of 104°F
(40°C). Do not block or cover the vents.
• Air Flow—Make sure that there is adequate air flow around the device.
• Mechanical Loading—Check that the device is level and stable to
avoid any hazardous conditions.
You can install the UC 540 on a desktop or mount in on a wall. To install it on
a desktop, attach the four rubber feet (included) on the bottom of the unit
and place it on a flat surface.
Wall Mounting
The UC 540 has two key holes on the bottom of the chassis for mounting
the unit on a wall or other vertical surface. The power supply is mounted
to the wall using the supplied wall-mount bracket.
Cisco Unified Communications 500 Series Model UC 540 Quick Start Guide
Regulatory Compliance and
9
Hide quick links:
Advertisement
Table of Contents
