Download Print this page
Cisco UC540W-BRI-K9 Reference Manual
Cisco UC540W-BRI-K9 Reference Manual

Cisco UC540W-BRI-K9 Reference Manual

Unified communications 500 series model 540 for small business
Hide thumbs Also See for UC540W-BRI-K9:

Advertisement

Cisco Unified Communications
500 Series Model 540 for
Small Business
Reference Guide
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Advertisement

loading

Summary of Contents for Cisco UC540W-BRI-K9

  • Page 1 Cisco Unified Communications 500 Series Model 540 for Small Business Reference Guide © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
  • Page 2: Table Of Contents

    Reference Guide Contents Product Overview Product Part Numbers Interfaces and Modules Licensing Basic Call Center Capabilities Voice Resource Utilization © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 11...
  • Page 3: Product Overview

    Product Part Numbers The Cisco UC 540 is available in two versions, an FXO (analog) model and a Basic Rate Interface (BRI) base model. With ease of ordering as a focus area, each has its own product ID. In addition, there is one software licensing product, multiples of which can be installed to achieve the desired user count.
  • Page 4: Licensing

    Licensing The Cisco UC 540 includes eight user licenses. These licenses enable the use of Cisco Unified IP Phones and allow users to access the IP PBX features, including voicemail. In addition, supplementary user licenses are bundled to help with deployments that need a few extra licenses. For additional licensing needs, the L-UC-PRO-8U= may be ordered.
  • Page 5: Basic Call Center Capabilities

    IP trunking (SIP or H.323) for PSTN access or multisite interconnection. Each DSP can support 16 g711 channels or 8 g729 channels. This enables a total of 64 g711 channels on the Cisco UC 540. Table 8 indicates the DSP resource utilization based on the feature. Tables 9 and 10 show a few deployment scenarios based on the combination of these features.
  • Page 6 Up to a maximum A maximum of 9 2BRI NT/TE sessions of 4x8 or 8x4 of 4x8 or 2x16 or Transcoding sessions for Transcoding © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 11...
  • Page 7 ● Remaining 1 DSPs used for Conferencing Localization Cisco UC 500 series is enabled with localization for IP Phones, Voicemail and Dial Plan. Table 11 summarizes the localization support on the platform. © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
  • Page 8 Table 12 lists the physical specifications. Table 13 lists the power requirements for the platform. Table 14 provides the environmental specifications, and Table 15 shows the compliance information. © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 11...
  • Page 9 Console port (up to 115.2 kbps) Auxiliary port* * The auxiliary port on the Cisco UC 540 is the same as the console port. The port has an ability to auto-detect modem tones and switch over to the auxiliary port functionality.
  • Page 10 ● ACIF S002 ● ACIF S003 ● ACIF S004 ● ANZ PTC200 ● MOH interface ● ACIF S038 ● ACIF S004 ● TIA-464C © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 11...
  • Page 11 ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0910R)

This manual is also suitable for:

Uc540w-fxo-k9