D-Link DCS-3716 User Manual page 40

Configuration
Here you can configure and schedule the recording settings.
Recording.entry.
The unique name of the entry.
name:
Enable.this.
Select this to enable the recording function.
recording:
Priority:
Set the priority for this entry. The entry with a higher priority
value will be executed first.
Source:
The source of the stream.
Recording.
Scheduling the recording entry.
schedule:
Recording.
Configuring the setting for the recording.
settings:
Destination:
Select the folder where the recording file will be stored.
Total.cycling.
Please input a HDD volume between 1MB and 200GB for recording space. The recording data will replace the oldest record
recording.size:
when the total recording size exceeds this value. For example, if each recording file is 6MB, and the total cyclic recording
size is 600MB, then the camera will record 100 files in the specified location (folder) and then will delete the oldest file and
create new file for cyclic recording.
Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure
your HDD has enough space, and it is better to not save other files in the same folder as recording files.
Size.of.each.file. File size for each recording file. You may input the value in the range of 200-5000.
for.recording:
File.Name.Prefix: The prefix name will be added on the file name of the recording file(s).
D-Link DCS-3716 User Manual
Add Recording
40