Network Setup; Physical Setup; Logical Setup - NETGEAR UTM10 - ProSecure Unified Threat Management Appliance Application Note

Network Setup

Physical setup

Layer 2/Layer 3 switch Port 0/1 connected to UTM10 Port 2
Wireless AP LAN port connected to UTM10 Port 1
UTM10 WAN port connected to the Internet

Logical setup

UTM 10 Configuration
AP configuration
Layer 2/ Layer 3 switch configuration
LAN IP
192.168.1.1
VLAN1 (default)
IP 192.168.1.1
Membership: Port 1, 2, 3, 4
DHCP enabled 192.168.1.x/24
VLAN20
IP 192.168.20.1
Membership: Port 1
DHCP enabled 192.168.20.x/24
VLAN30
IP 192.168.30.1
Membership: Port 1
DHCP enabled 192.168.30.x/24
LAN IP
192.168.1.235
Untagged VLAN: 1 – Management VLAN: 1
–
SSID Corporate
–
SSID Guest
SSID Engineering –
LAN IP
192.168.1.239
Management VLAN: 1
Membership: all ports Untagged in VLAN1
VLAN 1(ID 1)
VLAN 20 (ID 20)
VLAN30 (ID 30)
Version 2.0