Cisco 1230AG - Aironet - Wireless Access Point Configuration Manual page 32

12. In the navigation pane under
13.
14. Click
15. In the navigation pane under
16. Select the
17. In the navigation pane under
18. Select the
32
handset power should be configured to match the highest transmit
power of the APs. Click the Apply button to save the settings.
Select from the drop-down list.
WMM
Apply button to saved changes
Admission Control (ACM) must be enabled on both the Voice and
Video AC when the handset is configured for Admission Control
Mandatory.
Admission Control
the handset is configured with Admission Control set to Optional,
this setting must match setting in Video)
Any WLAN using the network must be disabled before changing
Admission Control settings.
Admission Control
the handset is configured with Admission Control set to Optional,
this setting must match setting in Voice)
VIEW Certified Configuration Guide
select
802.11b/g/n, EDCA Parameters.
802.11b/g/n, select Voice
( ) checkbox. (This step is optional if
ACM
802.11b/g/n, select Video
( ) checkbox. (This step is optional if
ACM
PN: 1725-36192-001_H