Cisco 1230AG - Aironet - Wireless Access Point Configuration Manual page 20

11. Under the
20
b. For WPA-PSK, under
i. Select the
WPA-Policy
ii. Select the
TKIP
iii. At
Auth Key Mgmt
The may be selected as
PSK Format
WPA-PSK and WPA2-PSK policies
c. For WPA2-Enterprise (802.1X), under
i. Select the
WPA2 Policy
ii. Select the
AES
iii. At
Auth Key Mgmt
down list.
tab
Advanced
a Set the to for the radio that corresponds to the
DTIM 2
SpectraLink Wireless Telephone configuration.
b Ensure the
Enable Session Timeout
c Uncheck the
Client Load Balancing
boxes.
VIEW Certified Configuration Guide
WPA+WPA2 Parameters:
check box.
check box for
WPA Encryption
select from the drop-down list.
PSK
or
ASCII
.
WPA+WPA2 Parameters
check box.
check box for
WPA2 Encryption
, select
802.1X+CCKM
box is unchecked.
and
Client Band Select
.
for both
HEX
:
.
from the drop-
PN: 1725-36192-001_H