Cisco PVC300 - Small Business Pan Tilt Optical Zoom Internet Camera Network Administration Manual page 54

Using the Setup Screen
Configuring Camera Applications
NOTE
Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE
option to enable passive mode FTP and allow data transmission to pass
through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be
shown in a pop-up window. If it works, you will also receive a test.txt file on the
FTP server.
HTTP—Select to send the media to a HTTP server when a trigger is activated.
•
URL—Enter the URL of the HTTP server.
•
User name—Enter the user name.
•
Password—Enter the password.
To verify if the HTTP settings are correctly configured, click Test. The result will be
shown in a pop-up window. If it works, you will also receive a test.txt file on the
HTTP server.
Network storage—Select to send the media to a network storage when a trigger
is activated.
•
Network storage location—Enter the path of the network storage.
•
Workgroup—Enter the workgroup for network storage.
•
User name—Enter the user name.
•
Password—Enter the password.
To verify if the network storage settings are correctly configured, click Test. The
result will be shown in a pop-up window. If it works, you will also receive a test.txt
file on the network storage server.
When completed, click Save to take effect and then click Close to quit this page.
The new server name appears in the server drop-down list on the application
page as below. To remove a server setting from the list, select a server name from
the drop-down list and then click Delete.
You can only delete an event setting when the setting is not active.
6
54