Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander Operator's Manual page 15

I _, WARNING:
Empty dust bag before storage 1toIhelp prevent possible fire I
hazard, especially when resin coating or linseed oil finishes have been sanded.
I
NOTE: For more efficient operation, we recommend that you empty the dust
bag when it is no more than half full. This will allow tlhe air to flow through the
bag better. ALWAYS empty and clean the dust bag thoroughly when you've
finished sanding and before you store the sander.
A'I-rACHING VAC HOSE TO THE DUST COLLECTION SYSTEM (See Fig. 5)
When sanding for extended periods of time, you can easily attach your sander
to a vac hose and wet/dry vac (sold separately).
1. Unplug the sander.
I Z_ WARNING: Failure to unplug the sander could result in accidental starting I causing possible serious personal injury.
2. Remove dust bag assembly from the vac adapter
(see page 14, Fig. 4a and 4b).
3. Connect vac adapter with dual dust ports to dust exhaust hole
of sander (see Fig. 5).
4. Attach either a 11/4or 21/2-in vac hose
onto the vac adapter's dual dust ports
( see Fig. 5a and 5b).
5. Connect hose to wet / dry 'vac. Turn
vac on while operating sander.
Fig. 5
hose adapter'
to exhaust hole of sander
Fig. 5a
Connect
11/4-in. hose
Fig. 5b
Connect
2'/2-in. hose
15
27675
2/11/08