Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander Operator's Manual page 10

ADDITIONAL RULES FOR SAFE OPERATION cont.
6. INSPECT the tool cords periodically and if damaged have them repaired
at your nearest Sears Service Center. ALWAYS BE AWARE of the cord location.
7. ALWAYS check the tool for damaged parts. Before further use of the tool, a guard
or other part that is damaged should be carefully checked to determine if it will operate
properly and perform its intended function. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition that may affect the tool's operation.
A guard or other part that is damaged should be properly repaired or replaced at a
Sears Service center.
8. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to
instruct others who may use this tool. If someone borrows this tool, make
sure they have these instructions also.
/_ WARNING:
This power tool should NEVER be €-onnected to the power
source when you are assembling parts, making adjustments, installing or
removing sandpaper, cleaning or when it is not in use. Disconnecting the sander
will prevent accidental starting, which could cause serious personal injury.
1. Remove the sander from the carton and inspect it carefully to make sure
that no breakage or damage has occurred during shipping.
2. Do not discard any of the packing materials until all parts are accounted for.
3. Included with your sander is a dust bag assembly, with vac adapter.
4. 2 discs of hook and loop sandpaper are included; orle fine grit, and one medium grit.
5. If any of the parts are damaged or missing (refer to PAFr]-s LIST below), return the
sander to your nearest Sears store or Craftsman outlet to have the sander replaced.
I /IX WARNING:
If any parts are missing, DO NOT operate this power tool until I
the missing parts are replaced. Failure to do so could result in possible serious
]
personal injury.
10