Status Messages Screen; Network Statistics Screen; Firmware Versions Screen; Expansion Module(S) Screen - Cisco 7971G-GE - IP Phone VoIP Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
To display the Status menu, press the Settings button and then select Status.
To exit the Status menu, press the Exit softkey.
The Status menu includes these options, which provide information about the phone and its operation:
•
•
•
•

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up.
the status messages that might display. This table also includes actions you can take to address errors.
To display the Status Messages screen, follow these steps:
Procedure
Press the Settings button.
Step 1
Select Status.
Step 2
Select Status Messages.
Step 3
OL-15299-01
Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
Firmware Versions—Displays the Firmware Versions screen, which shows information about the
firmware running on the phone. For more information, see the
on page 7-11.
Expansion Module(s)—Displays the Expansion Module(s) screen, which shows information about
the Cisco Unified IP Phone Expansion Module 7914, if connected to the phone. For more
information, see the "Expansion Module(s) Screen" section on page
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
"Status Messages Screen" section on page
"Network Statistics Screen" section on page
Status Menu
7-3.
7-9.
"Firmware Versions Screen" section
7-12.
Table 7-2 describes
7-3