Giving Users Access To The User Options Web Pages; Specifying Options That Appear On The User Options Web Pages; Cisco Unified Ip Phone 7961G/7961G-Ge And 7941G/7941G-Ge For Cisco Unified Communications Manager - Cisco 7941G - Unified IP Phone VoIP Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users

Giving Users Access to the User Options Web Pages

Specifying Options that Appear on the User Options Web Pages

Note
Step 1
Step 2

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1

OL-14620-01
Before a user can access the User Options web pages, you must use Cisco Unified
Communications Manager Administration to add the user to a standard Cisco
Unified Communications Manager end user group: choose User Management >
User Groups.
For additional information, refer to Cisco Unified Communications Manager
Administration Guide, "End User Configuration" section.
Most options that are on the User Options web pages appear by default. However,
the following options must be set by the system administrator by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager
Administration:
Show Ring Settings
•
Show Line Text Label Settings
•
Show Call Forwarding
•
The settings apply to all User Options web pages at your site.
To specify the options that appear on the User Options web pages, follow these
steps:
Procedure
From Cisco Unified Communications Manager Administration, choose System >
Enterprise Parameters.
The Enterprise Parameters Configuration window appears.
In the CCMUser Parameters area, specify whether a parameter appears on the
User Options web pages by choosing one of these values from the Parameter
Value drop-down list box for the parameter:
True—Option displays on the User Options web pages (default except for
•
Show Ring Settings, Show Line Text Label, and Show Call Forwarding).
Managing the User Options Web Pages
5-31