How Users Subscribe To Services And Configure Phone Features; How Users Access A Voice Messaging System - Cisco 7941G - Unified IP Phone VoIP Administration Manual

How Users Subscribe to Services and Configure Phone Features

How Users Subscribe to Services and Configure
Phone Features

How Users Access a Voice Messaging System

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
A-4
End users can perform a variety of activities by using the Cisco Unified
Communications Manager User Options web pages. These activities include
subscribing to services, setting up speed dial and call forwarding numbers,
configuring ring settings, and creating a personal address book. Keep in mind that
configuring settings on a phone by using a website might be new for your end
users. You need to provide as much information as possible to ensure that they can
successfully access and use the User Options web pages.
Make sure to provide end users with the following information about the User
Options web pages:
The URL required to access the application. This URL is:
•
http://servername:portnumber/ccmuser/, where servername is the host on
which the web server is installed.
A user ID and default password are needed to access the application.
•
These settings correspond to the values you entered when you added the user
to Cisco Unified Communications Manager (see the
Unified Communications Manager" section on page
A brief description of what a web-based, graphical user interface application
•
is, and how to access it with a web browser.
An overview of the tasks that users can accomplish by using the web page.
•
Cisco Unified Communications Manager lets you integrate with many different
voice messaging systems, including the Cisco Unity voice-messaging system.
Because you can integrate with a variety of systems, you must provide users with
information about how to use your specific system.
You should provide this information to each user:
How to access the voice messaging system account.
•
Make sure that you have used Cisco Unified Communications Manager to
configure the Messages button on the Cisco Unified IP Phone.
Appendix A Providing Information to Users Via a Website
"Adding Users to Cisco
5-30).
OL-14620-01