Internal Error Codes - Cisco SPA921 - - IP Phone Provisioning Manual

Provisioning Field Reference

Internal Error Codes

Internal Error Codes
Cisco Small Business IP Telephony Devices Provisioning Guide
Parameter Name
ERR
UID1
UID2
ISCUST
The IP Telephony Device defines a number of internal error codes (X00–X99) to
facilitate configuration in providing finer control over the behavior of the unit under
certain error conditions.
Parameter Name
X00
X20
X40
X60
Description and Default Value
Result message of resync or upgrade attempt.
Only useful in generating result syslog
messages. The value is preserved in the
UPGERR variable in the case of upgrade
attempts.
The contents of the Line 1 User_ID
configuration parameter (Firmware 2.0. 1 1 and
above).
The contents of the Line 2 User_ID
configuration parameter (Firmware 2.0. 1 1 and
above).
Value=1 if unit is customized, 0 otherwise;
customization status viewable on WebUI Info
page.
Description and Default Value
Transport layer (or ICMP) error when sending a
SIP request.
SIP request times out while waiting for a
response.
General SIP protocol error (for example,
unacceptable codec in SDP in 200 and ACK
messages, or times out while waiting for ACK).
Dialed number invalid according to given dial
plan.
4
94