Assignment Expressions; Url Syntax - Cisco SPA921 - - IP Phone Provisioning Manual

Creating Provisioning Scripts
Proprietary Plain-Text Configuration File
Cisco Small Business IP Telephony Devices Provisioning Guide

Assignment Expressions

Arbitrary parameters can be pre-assigned values within the context of
Profile_Rule* and Upgrade_Rule parameter. This causes the assignment to be
performed before the profile if retrieved.
The syntax for performing these assignments is a list of individual parameter
assignments, enclosed within parentheses ( assignments )!, with each assignment
taking the form:
ParameterXMLName = "Value" ;
Note that the recognized parameter names correspond to the names as for XML-
based profiles.
Any parameter can be assigned a new value in this way, and macro-expansion
applies. For example, the following is a valid assignment expression:
( User_ID_1_ = "uid$B" ; GPP_C = "" ; GPP_D = "$MA" ; )!
For conciseness, the general purpose parameters GPP_A through GPP_P can also
be referred to by the single lowercase letters a through p. The example above is
equivalent to the following:
( User_ID_1_ = "uid$B" ; c = "" ; d = "$MA" ; )!
White space can optionally be used for readability.

URL Syntax

Standard URL syntax is used to specify how to retrieve configuration files and
firmware loads in Profile_Rule* and Upgrade_Rule parameters, respectively. The
syntax is as follows:
[ scheme:// ] [ server [:port]] filepath
Where scheme is one of the following values:
• tftp
• http
• https
2
46