Logging With Syslog - Cisco SPA921 - - IP Phone Provisioning Manual

Provisioning Tutorial
Basic Resync
STEP 10
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business IP Telephony Devices Provisioning Guide
This resync URL method is designed for development and testing. When it
receives this command, the IP Telephony Device at address 192. 1 68. 1 . 1 00
requests the file
basic.txt
parses the downloaded file and updates the GPP_A parameter with the value
12345678.
Verify that the parameter was correctly updated by refreshing the admin/
advanced page on the PC web browser and selecting the Provisioning tab on that
page.
The GPP_A parameter should now contain the value 12345678.

Logging with syslog

The IP Telephony Device sends a syslog message to the designated syslog server
when the device is about to resync to a provisioning server and after the resync
has either completed or failed. This server is identified in the web server
administration (admin/advanced, System tab, Syslog_Server parameter). It is
instructive to configure the syslog server IP address into the device and observe
the messages generated during each exercise.
Exercise
Install and activate a syslog server on the local PC.
Program the PC IP address into the Syslog_Server parameter, and submit the
change.
Click the System tab and enter the value of your local syslog server into the
Syslog_Server parameter.
Repeat the TFTP Resync operation described in the previous exercise.
The device generates two syslog messages during the resync. The first indicates
that a request is in progress. The second marks success or failure of the resync.
Verify that your syslog server received messages such as the following:
SPA-962 00:0e:08:ab:cd:ef –- Requesting resync tftp://192.168.1.200/basic.txt
SPA-962 00:0e:08:ab:cd:ef –- Successful resync tftp://192.168.1.200/basic.txt
from the TFTP server at IP address 192. 1 68. 1 .200. It then
3
66