Netgear Vpn Configuration; Dg834G V4 To Fvl328 - NETGEAR DG834Gv4 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual

DG834G v4 to FVL328

This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DG834G v4 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).
Configuration Profile
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify that the firmware is up to date, and taht you have all the addresses that will be
necessary, and all of the parameters that need to be set on both sides. Check that there are no
firewall restrictions.
Table B-1. Profile Summary
VPN Consortium Scenario:
Type of VPN
Security scheme:
IP Addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B

NETGEAR VPN Configuration

NETGEAR VPN Configuration
Scenario 1
LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
IKE with Preshared Secret/Key (not certificate-based)
Static IP address
Static IP address
v2.0, September 2007
Appendix B
B-1