Operating Your Breville Wizz™ Mix Digital Hand Mixer; Care And Cleaning - Breville BHM500 Instructions Manual

Operating your Breville Wizz™ Mix Digital Hand
Mixer
continued
Step 7
Move the Hand Mixer in a slight circular
action during mixing to allow the beaters to
efficiently mix the ingredients. Stop the Hand
Mixer intermittently and use a plastic spatula to
scrape down the sides of the mixing bowl, then
continue mixing.
Always turn the Hand Mixer off if you need to
scrape down the bowl during use.
Avoid allowing the beaters to hit against the
side of the mixing bowl while the Hand Mixer
is operating as this will result in damage to the
beaters.
CAUTION: ENSURE THE HAND MIXER
IS SWITCHED OFF AND UNPLUGGED FROM
THE POWER OUTLET BEFORE ATTACHING THE
BEATERS /DOUGH HOOKS TO THE HAND MIXER.
CAUTION: AVOID CONTACT WITH
BEATERS DURING OPERATION. KEEP HANDS,
HAIR, CLOTHING, SPATULAS AND OTHER
UTENSILS AWAY FROM THE BEATERS/DOUGH
HOOKS TO PREVENT INJURY OR DAMAGE TO
THE HAND MIXER.

Step 8
When mixing is complete move the On/Off
switch back to the 'OFF' position. Turn the
power off at the power outlet and unplug
power cord.
Step 9
Remove the beaters or dough hooks by
pressing the eject button while grasping the
beater shafts. The beaters or dough hooks will
be released automatically. DO NOT try to pull
the beaters or dough hooks out of the sockets.
TURBO BOOST FUNCTION
Pressing the Turbo Boost button while mixing,
provides an extra burst of power (overriding
the speed setting being used). Press the Turbo
Boost button and hold it down for no more
than 0 seconds to avoid overheating. After the
Turbo Boost has been used, always turn the
mixer off and allow it to cool for a few minutes
before using again.
TIMER FUNCTION
Many recipes will tell you to mix or beat
ingredients together for a certain amount of
time. Your Hand Mixer has a timer function
which allows you to see how long you have
been mixing. Once you begin operating the
Hand Mixer, the timer will automatically start
counting. Once the Hand Mixer is switched
to the Off setting, the timer will automatically
return to 00:00.

Care and Cleaning

CLEANING
Step 1
Before cleaning, ensure the Hand Mixer is
switched off at the power outlet, the power
cord is unplugged from the power outlet and
the ON/OFF switch is in the 'OFF' position.
Step 2
Press the eject button and remove the beaters
or dough hooks.
Step 3
Use a rubber spatula to clean mixture
remaining on the beaters or dough hooks.
Wash the beaters or dough hooks in warm
soapy water with a soft cloth. Rinse and dry
thoroughly. The beaters or dough hooks may
also be washed in a dishwasher. Do not allow
the beaters or dough hooks to soak in water for
an extended period of time, as this may lead to
the metal finish being damaged.
Do not use abrasive scouring pads or cleaners
when cleaning the beaters as these may
scratch the beater surface.
Step 4
Wipe the Hand Mixer body with a damp cloth
and dry thoroughly. Polish with a soft dry cloth.
Step 5
Wipe any excess food particles from the power
cord.
CAUTION: NEVER IMMERSE THE HAND
MIXER, POWER CORD OR POWER PLUG IN
WATER OR ANY OTHER LIQUID
STORAGE
Always unplug the Hand Mixer from the power
outlet before storage. Wrap the power cord
around the mixer body. Stand the mixer body
upright on its heal rest. Safely store the beaters
and dough hooks to avoid damage.
9