Table of Contents
Advertisement
using your hand mixer
before first use
Make sure your hand mixer is switched off and unplugged from the mains supply
socket before cleaning. Never immerse the body of the hand mixer, cord or plug in
water or any other liquid.
•
Before using your hand mixer for the first time, wash the three stainless steel beaters and two
dough hooks in warm, soapy water. Rinse and dry thoroughly. Do not use harsh abrasives,
chemicals or oven cleaners.
•
Using a damp cloth or sponge, wipe the exterior of your hand mixer body.
assembling - beaters
Make sure your hand mixer is switched off and unplugged from the mains supply
socket before fitting or removing the beaters or dough hooks.
1.
Ensure that your hand mixer is unplugged from the supply socket and the speed selector is
set to 0 (off).
.
Insert the beater with the blue gear wheel into the slot with the blue recess. Push it firmly
until it locks into place.
.
Insert the beater with the red gear wheel into the slot with the red recess. Push it firmly until
it locks into place.
.
Insert the remaining beater into the slot with the black recess pushing it firmly into place.
assembling - dough hooks
Make sure your hand mixer is switched off and unplugged from the mains supply
socket before fitting or removing the beaters or dough hooks.
Ensure that your hand mixer is unplugged from the supply socket and the speed selector is set to
0 (off).
A.
Insert the dough hook with the large collar into the slot with the red recess.
B.
Insert the dough hook with the small collar into the slot with the black recess.
Don't fit either of the dough hooks into the slot with the blue recess.
6
Hide quick links:
Advertisement
Table of Contents
