Grounding; Extension Cords; Wiring Diagram - Grizzly G1035 Instruction Manual

Grounding

Electrocution or fire may
result if this machine is
not grounded correctly.
Verify that any existing
electrical outlet and cir-
cuit you intend to plug
into is actually grounded.
DO NOT use the machine
if it is not grounded.
In the event of a malfunction or breakdown,
grounding provides electric current a path of least
resistance to reduce the risk of electric shock.
This tool is equipped with an electric cord having
an equipment grounding conductor. Improper con-
nections of the electrical-grounding conductor can
result in the risk of electric shock. The conductor
with green or green and yellow striped insulation
is the electrical grounding conductor. If repair or
replacement of the electric cord or plug is neces-
sary, do not connect the equipment grounding
conductor to a live terminal.
This machine must have a ground prong in
the plug to help ensure that it is grounded.
DO NOT remove ground prong from plug
to fit into a two-pronged outlet! If the plug
will not fit the outlet, have the proper outlet
installed by a qualified electrician.
-8-
Check with a qualified electrician or one of our
service personnel if the grounding instructions are
not completely understood, or if you are in doubt
as to whether the tool is properly grounded.

Extension Cords

If you find it necessary to use an extension
cord with this machine:
• Only use a cord that is rated for hard service
(Grade S).
• Only use a cord that contains a grounding
prong.
• Use at least a 14 gauge cord if the cord is 25
feet long or less.
• Use at least a 12 gauge cord if the cord is
between 26-100 feet.

Wiring Diagram

The Model G1035 comes prewired for 110 volt
operation. Wiring diagrams for 110V and 220V
operation are provided at the back of this man-
ual.
We have covered some basic electrical
requirements for the safe operation of your
machine. These requirements are not nec-
essarily comprehensive. You must be sure
that your particular electrical configura-
tion complies with local and state codes.
Ensure compliance by checking with your
local municipality or a licensed electrician.
G1035 Heavy-Duty Shaper