Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual page 89

Router tab > WAN Setup page >
Optional Settings section
HostName
Domain
Primary DNS
Secondary DNS
DNS Service Order
DNS Query Mode
Primary NTP Server
Secondary NTP Server
Router tab > WAN Setup page >
MAC Clone Settings section
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification, like
a social security number. Some ISPs require you to register a MAC address in order to access the
Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the
MAC address you have currently registered with your ISP to the router with the MAC Address
Clone feature.
Enable MAC Clone Service
Cloned MAC Address
Linksys ATA Administration Guide
The host name of the ATA device.
The network domain of the ATA device.
The DNS server that is used by the ATA device.
NOTE: When DHCP is enabled, you can enter the IP address of a DNS
server in addition to DHCP-supplied DNS servers. When DHCP is
disabled, enter the primary DNS server. The default is 0.0.0.0.
Sets the secondary DNS server to take over if problems are discovered
with the Primary DNS server.
NOTE: When DHCP is enabled, you can enter the IP address of a primary
or secondary DNS server in addition to DHCP-supplied DNS servers.
When DHCP is disabled, enter the primary and secondary DNS server.
The default is 0.0.0.0.
The method for selecting the DNS server: Manual (enter the IP address
of the DNS server manually; that is do not look at the DHCP-supplied
DNS table), Manual/DHCP, and DHCP/Manual.
The mode of DNS query: parallel or sequential.
NOTE: With parallel DNS query mode, the ATA device sends the same
DNS lookup request to all the DNS servers at the same time, and the first
incoming reply is accepted by the ATA device.
The default is parallel.
The IP address or name of the primary NTP server.
The IP address or name of the secondary NTP server.
To use MAC Address cloning, select Yes. Default is No.
Use when your ISP requires a certain MAC address. It's usually the
address for your PC.
WAN Setup page
89