Regional; Call Progress Tones Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Voice tab >
Regional page
You can use the Regional page to localize your system with the appropriate regional settings.
With some variations, depending on the model, this page includes the following sections:
• "Call Progress Tones section" section on page 110
• "Distinctive Ring Patterns section" section on page 112
• "Distinctive Call Waiting Tone Patterns section" section on page 113
• "Distinctive Ring/CWT Pattern Names section" section on page 113
• "Ring and Call Waiting Tone Spec section" section on page 114
• "Control Timer Values (sec) section" section on page 114
• "Vertical Service Activation Codes section" section on page 116
• "Vertical Service Announcement Codes section (SPA2102, SPA8000)" section on page 119
• "Outbound Call Codec Selection Codes section" section on page 120
• "Miscellaneous section" section on page 121
Voice tab > Regional page >

Call Progress Tones section

Field Description
Dial Tone Prompts the user to enter a phone number. Reorder Tone is played
automatically when Dial Tone or any of its alternatives times out.
The default is 350@-19,440@-19;10(*/0/1+2).
Second Dial Tone Alternative to the Dial Tone when the user dials a three-way call.
The default is 420@-19,520@-19;10(*/0/1+2).
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter an external phone
number, as opposed to an internal extension. It is triggered by a, (comma)
character encountered in the dial plan.
The default is 420@-19;10(*/0/1).
Prompt Tone Prompts the user to enter a call forwarding phone number.
The default is 520@-19,620@-19;10(*/0/1+2).
Busy Tone Played when a 486 RSC is received for an outbound call.
The default is 480@-19,620@-19;10(.5/.5/1+2).
Reorder Tone Played when an outbound call has failed or after the far end hangs up during
an established call. Reorder Tone is played automatically when Dial Tone or
any of its alternatives times out.
The default is 480@-19,620@-19;10(.25/.25/1+2).
Linksys ATA Administration Guide
Regional page
110