Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual page 154

User guide
Hide thumbs Also See for RTP300 - Broadband Router With 2 Phone Ports:
Table of Contents

Advertisement

Field
Description
(PSTN) Long Silence
This value is minimum length of PSTN silence (or inactivity) in seconds to
Duration
trigger a gateway call disconnection if Detect Long Silence is yes.
The default is 30.
Silence Threshold
This parameter adjusts the sensitivity of PSTN silence detection. Choose from
{very low, low, medium, high, very high}. The higher the setting, the easier to
detect silence and hence easier to trigger a disconnection.
The default is medium.
Disconnect Tone
This value is the tone script which describes to the SPA the tone to detect as
a disconnect tone. The syntax follows a standard Tone Script with some
restrictions. Default value is standard US reorder (fast busy) tone, for 4
seconds.
Restrictions:
The Disconnect Tone Script and Impedance value for various countries
follow:
US—480@-30,620@-30;4(.25/.25/1+2) —Impedance: 600
UK—400@-30,400@-30; 2(3/0/1+2) —Impedance: 370+620
France—440@-30,440@-30; 2(0.5/0.5/1+2) —Impedance: 270+750||150nF
Germany—425@-10; 10(0.48/0.48/1) —Impedance:220+820||120nF
Netherlands—425@-30,425@-30; 2(0.5/0.5/1+2) —Impedance: 600
Sweden—425@-10; 10(0.25/0.25/1) —Impedance:600
Norway—425@-10; 10(0.5/0.5/1) —Impedance: 600
Italy—425@-30,425@-30; 2(0.2/0.2/1+2)— Impedance: 220+820||120nF
Spain—425@-10; 10(0.2/0.2/1,0.2/0.2/1,0.2/0.6/1) —Impedance:
220+820||120nF
Portugal—425@-10; 10(0.5/0.5/1)— Impedance:220+820||120nF
Poland—425@-10; 10(0.5/0.5/1)— Impedance: n/a
Denmark—425@-10; 10(0.25/0.25/1)— Impedance: 600
Linksys ATA Administration Guide
2 frequency components must be given. If single frequency is desired,
the same frequency is used for both
The tone level value is not used. –30 (dBm) should be used for now.
Only 1 segment set is allowed
Total duration of the segment set is interpreted as the minimum
duration of the tone to trigger detection
6 segments of on/off time (seconds) can be specified. A 10% margin is
used to validated cadence characteristics of the tone.
PSTN Line page (AG310 and SPA3102)
154

Advertisement

Table of Contents
loading

Table of Contents