Advanced Wireless LAN Connection Settings
This section explains how to configure advanced settings for a wireless LAN connection
between the
and a computer.
YP-100
All of the operations in this section assume that you have already configured the settings
under "Wireless LAN Connection Basics" (page 51).
For details about projection operations after establishing a connection, see "Using Wireless
LAN for Projection" (page 90).
Web Setup
In order to modify the settings of a
advanced settings of other
page named "Web Setup" on you computer screen. To display Web Setup, use a web
browser running on a computer that is connected to the
To display and log into the Web Setup page
1
Use the Simple Connection profile to establish a wireless LAN connection
between a computer and the YP-100.
See "Establishing a Wireless LAN Connection with a Single Computer Using a Simple
Connection" on page 52 for more information.
If a Simple Connection is already established between the first computer and the YP-100,
proceed to step 2.
2
On the Wireless Connection window of the computer, click the
This will start up the computer's default browser and display an initial page like the one
shown below.
The Web Setup page may not appear if your browser is running already. In this case,
quit the browser and then click the
YP-100
manual setup profile and to configure
settings, you need first to display a special web browser
YP-100
button again.
64
over a wireless LAN.
YP-100
button.