Casio YP-100 User Manual page 62

4 4 4 4 To use the Manual Connection profile to establish a wireless LAN
connection between the other computers and the YP-100
Note
Perform the following steps after finishing the procedures under "
profiles for the computers" (page 55) and "
establish a wireless LAN connection between the first computer and the YP-100" (page
57).
1
On the connection profile switching dialog box for each of the other computers,
click the "Profile Name" down arrow button and then select "Test" from the
menu that appears.
2
Click the [Close] button.
This will cause the dialog box shown below to appear.
When the computer finds the YP-100, the display will change to a dialog box like the
one shown below for selecting the connected device.
3
Move the highlighting to the YP-100 unit to which you want to connect and then
click the [OK] button.
The computer will connect with the YP-100 and the above dialog box will close. Confirm
"
that the Connection Profile
Connection window shows
3
To use the Manual Connection profile to
"
setting for the connected device information on the Wireless
"
Manual Connection 1 (Test)
62
2
To create connection
"
.