Creating A Computer Connection Profile - Casio YP-100 User Manual

Creating a Computer Connection Profile

After you modify the settings of the
modify the existing wireless LAN connection settings (connection profile) of the computer
accordingly, or you will have to create a new connection profile. This section explains the
procedure for using Wireless Connection to create a new profile or to modify the existing
profile of a computer that has a CASIO YW-2 wireless adapter connected.
Important!
For the required computer wireless LAN connection settings when you are using another
manufacturer's wireless LAN adapter or the computer's built-in LAN adapter, see the
user documentation that comes with the wireless LAN adapter or the computer you are
using.
To create a new computer connection profile
Note
This procedure shows how to create a new computer connection profile to match
modifications made in the settings of the
Connection 3". In this example, the
1
Perform the procedure under "To modify YP-100 manual connection settings"
(page 73) to modify YP-100 "Manual Connection 3" profile settings as shown
below.
Dialog Box Item
Profile Name
SSID
Access Mode
Security Setup
WPA/WPA2 Encoding
WEP Key/WPA/WPA2 Pass Phrase
DHCP
IP Address
Subnet Mask
Default Gateway
Channel
The above settings are provided as an example only. When you are establishing a
wireless LAN connection using the Access Point Mode, you need to configure settings to
match the actual access point. When configuring the IP address of the YP-100 (and the
computer connecting to the YP-100 over the wireless LAN connection), you need to
make sure that the IP address of the access point is different from all other IP
addresses within the same network.
The wireless LAN access point used for connection is also assumed to be configured
with the above settings.
For details about each of the settings on the dialog box, see "Manual Connection Setting
Reference" (page 79).
's manual setting profile, you will also need to
YP-100
's connection profile named "Manual
YP-100
name (page 70) is "Projector A".
YP-100
Setting
RoomB
ROOM_B
Access Point
WPA-PSK
TKIP
1234567890abc
Off
192.168.10.1
255.255.255.0
(To match wireless LAN access point settings.)
Auto
74