Projector Basics; Selecting The Input Source; Adjusting The Projected Image - Casio SC-210 User Manual

For detailed information about projection operations, see the User's Guide on the CD-ROM
that comes with the projector.
For details about connecting USB devices to the XJ-SC215/XJ-S37/XJ-S47/XJ-S57 projector
and procedures you need to perform to project images from a USB device, see "USB
Function Guide" on the bundled CD-ROM.

Selecting the Input Source

When you turn on the projector, it first checks the COMPUTER terminal for an input signal and
then the VIDEO terminal. When it detects an input signal, it automatically selects it and starts
projecting the signal.
Whenever you want to manually trigger an input source search operation, press the [INPUT] key.
Resolution
The projector outputs images using XGA (1024 pixels × 768 pixels) video resolution. The
projected image may appear relatively coarse and text in the image may not be readable
when the input signal from the connected computer is any other resolution other than XGA.
If this happens, try changing the output resolution setting of the computer to XGA. See the
user documentation that comes with your computer for details about changing its settings.
When the projector detects an input source (RGB, component, or VIDEO) after an auto or
manual select operation, the name of the newly selected source will appear in the projected
image for a few seconds.
The message "No signal input." will appear if no input signal can be selected.

Adjusting the Projected Image

To adjust the size of the projected image
Hold down the [ZOOM +] key to increase the size of the image or the [ZOOM –] key to
decrease it. When the image is the size you want, release the key.
Projector key operation
Press the [ZOOM] key and then hold down the [ ] or [
image, press the [ZOOM] key and then hold down the [ ] or [ ] key to decrease it. When the
image is the size you want, release the key.
To adjust image focus
Hold down the [FOCUS
the key.
Projector key operation
Press the [FOCUS] key and then hold down the [ ] ([
focus is the way you want, release the key.

Projector Basics

] or [FOCUS
] key. When the focus is the way you want, release
E-23
] key to increase the size of the
]) or [ ] ([ ]) key to focus. When