Casio SC-210 User Manual page 11

Basic operations
Table of Contents

Advertisement

* The projector's enter key does not have anything printed on it. When you see [ENTER] in
this manual, it means you should press the projector's enter key or the [ENTER] key of the
remote controller.
Never look into the lens while the projector is turned on.
Never allow the intake and exhaust vents to become blocked, and make
sure there is at least 30 cm (11.8 inches) clearance around the projector.
Warning
Blocked vents can cause heat to build up, creating the risk of fire and
malfunction.
Never touch the areas around the exhaust vents. These areas can
become very hot, and create the risk of burn injury.
[Bottom]
Elevation adjustment foot
Elevation
adjustment foot
release button
Left, right
adjustment feet (2)
[Back, Terminals]
Anti-theft lock hole
Intake vents
Remote control
signal receiver
Serial port*
* This serial port is for connecting a separately available special cable to control the projector
from a computer.
Never allow the intake vents on the side or back of the projector to
Warning
become blocked. Blocked vents can cause heat to build up, creating the
risk of fire and malfunction.
The anti-theft lock hole is provided for connection of an anti-theft chain. Visit the
Kensington Lock Website at http://www.kensington.com/ for more information.
AV terminal
E-11
General Guide
Lamp cover
COMPUTER terminal
USB port
(XJ-SC215/XJ-S37/
XJ-S47/XJ-S57 only)
Power connector

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents