Figure 5-3 Typical Cisco 4000 Series Component Tray-Cisco 4000-M Shown - Cisco EF4116 Hardware Installation And Maintenance Manual

Figure 5-3 Typical Cisco 4000 Series Component Tray—Cisco 4000-M Shown
Module handle
Module handle
Module handle
128-pin connector
(cutaway view)
Step 2 To lift the module out of its connector after removing the mounting screws, grasp the
network processor module handle and pull straight up. (See Figure 5-4.)
Do not wiggle the handle when handling the network processor module, and do not exert
Caution
any side-to-side pressure because the handle might work loose and damage the network processor
module.
Module
mounting
screw
J1
FW1
FW2
Module mounting
screw
Boot ROMs
Removing Network Processor Modules
LED
Module
mounting
screw
LEDs
Maintaining and Upgrading the Router 5-5
Front
of the
chassis