Cisco EF4116 Hardware Installation And Maintenance Manual page 57

Figure 2-40
ector
Alignment
groove
Figure 2-41
ector
Alignment
groove
Note
causing packets to be dropped. Therefore the Cisco 4500-M and Cisco 4700 routers currently
support one ATM module.
ATM Cabling
For single- or multi-mode SONET connections, connect the fiber cable to the SC-style receptacle on
the module front panel. The SONET SC-duplex connector is shipped with a dust plug. Remove the
plug by pulling on the plug as you squeeze the sides of the connector.
ATM Network Processor Module with STS-3c/STM-1 Single Mode PLIM
XMTR RCVR
BUSY RX CELLS
READY
RX ALARM
ATM Network Processor Module with STS-3c/STM-1 Multimode PLIM
XMTR RCVR
BUSY RX CELLS
RX ALARM
READY
Traffic from multiple ATM interfaces could exceed the available bandwidth in the router,
WARNING
ATM
SM AVOID EXPOSUREÐINVISIBLE
LASER RADIATION IS EMITTED
FROM THESE APERTURES.
1300
NM
CLASS 1 LASER PRODUCT
LASERKLASSE 1
CISCO SYSTEMS, INC.
170 W. TASMAN DRIVE
SAN JOSE CA. 95134
DATE:
ÒComplies with FDA Radiation
Performance Standards, 21 CFR,
Subchapter JÓ
ATM
MM
Network Connection Considerations
Alignment
groove
Alignment
groove
Preparing for Installation 2-35