Cisco 520-T1 - Small Business Pro SR Secure Router Software Configuration Manual page 29

Chapter 1 Basic Router Configuration
Command
Step 5
exit
Example:
Router(config-line)# exit
Router (config)#
Step 6
line [aux | console | tty | vty] line-number
Example:
Router(config)# line vty 0 4
Router(config-line)#
Step 7 password password
Example:
Router(config-line)# password aldf2ad1
Router(config-line)#
Step 8 login
Example:
Router(config-line)# login
Router(config-line)#
Step 9 end
Example:
Router(config-line)# end
Router#
For complete information about the command line commands, see the Cisco IOS Release 12.3
documentation set.
Configuration Example
The following configuration shows the command-line access commands.
You do not need to input the commands marked "default." These commands appear automatically in the
configuration file generated when you use the show running-config command.
!
line con 0
exec-timeout 10 0
password 4youreyesonly
login
transport input none (default)
stopbits 1 (default)
line vty 0 4
password secret
login
!
OL-14210-01
Purpose
Exits line configuration mode, and returns to
global configuration mode.
Specifies a virtual terminal for remote console
access.
Specifies a unique password for the virtual
terminal line.
Enables password checking at the virtual terminal
session login.
Exits line configuration mode, and returns to
privileged EXEC mode.
Cisco Secure Router 520 Series Software Configuration Guide
Configuring Basic Parameters
1-9