Isdn Bri Switch Types - Cisco 1720 Hardware Installation Manual

ISDN BRI Switch Types

Cisco 1700 Router Hardware Installation Guide
D-2
If the router is going to be the only device attached to the ISDN BRI line, ask
•
for point-to-point service and a data-only line.
If you will be connecting another ISDN device (such as an ISDN telephone)
•
to the ISDN BRI line, ask for point-to-multipoint service (subaddressing is
required) and a voice-and-data line.
ISDN BRI supports a variety of service provider switches.
geographic areas, the ISDN switch types supported by a Cisco 1700 router
ISDN BRI interface. Use the isdn switch-type command followed by the
corresponding keyword. You must reboot the router after entering this command
for the change to take effect.
Switch Type
Australia
TS013 switches
Europe
German 1TR6 switches
Norway NET3 switches (phase 1)
NET3 ISDN switches (UK and others)
VN2 ISDN switches
VN3 ISDN switches
Japan
NTT switches
North America
Basic 5ESS switches
NT DMS-100 and 5ESS custom switches
National ISDN-1(NI1) or switches
New Zealand
Net3 switches
Appendix D
Table D-1 ISDN BRI Switch Types
Ordering and Configuring an ISDN Line
Table D-1 lists, by
Keywords
basic-ts013
basic-1tr6
basic-nwnet3
basic-net3
vn2
vn3
ntt
basic-5ess
basic-dms100
basic-ni
basic-nznet3
78-5405-03