Notched edge
Removing a Mini-Flash Module
Cisco 1700 Router Hardware Installation Guide
C-6
Figure C-4
Installing a Mini-Flash Module
Mini-Flash module slot
Take the following steps to remove a mini-Flash module:
Step 1
Step 2
Appendix C
Installing and Upgrading Router Memory
WAN interface card slot
45 degrees
Insert your index finger between the mini-Flash module
and the mini-Flash module release lever, as shown in
Figure
C-5.
Firmly pull the release lever away from the module until
the module pops up and away from the module slot.
78-5405-03