Add Event - D-Link DCS-3415 User Manual

Section 4 - Configuration
Up to 3 events with its own settings can be created and configured here.
Event name:
Enter a name for the event.
Enable this event:
Select this to activate the event.
Priority: Set the priority for this event. The event with higher priority
will be executed first.
Delay: The delay time before checking next event. It is being
used for both events of motion detection and digital input
trigger.
Trigger:
The input type that triggers the event.
Video motion Motion is detected during live video monitoring. Select the
detection: windows that need to be monitored.
Periodic:
The event is triggered in specified intervals. The unit of
trigger interval is minute.
Digital input: External trigger input to the camera.
System boot: Triggers an event when the system boots up.
Time: Select Always or enter the time interval.
Trigger D/O:
Select to trigger digital output for specific number of
seconds when an event occurs.
CF Card: To record media to the CF card when an event is
triggered.
Note: Please format your CF card before use. All data in the CF card will be erased after formatting. Before you unplug the CF card from the
slot, please select "Remove CF card" to ensure that your data is secure.
D-Link DCS-3415 User Manual

Add Event

59