Ean/Jan 8 Addenda Separator; Msi; Msi Check Character - Honeywell 3800gPDF - Hand Held Decoding Linear Imager User Manual

EAN/JAN 8 Addenda Separator

When this feature is on, there is a space between the data from the bar code
and the data from the addenda. When turned off, there is no space.
Default = On.
* On
Off

MSI

<Default All MSI Settings>
MSI
On
* Off

MSI Check Character

Different types of check characters are used with MSI bar codes. You can
program the imager to read MSI bar codes with Type 10 check characters.
Default = Validate Type 10, but Don't Transmit.
When Check Character is set to Validate and Transmit , the imager will only
read MSI bar codes printed with the specified type check character, and will
transmit this character at the end of the scanned data.
When Check Character is set to Validate, but Don't Transmit , the unit will only
read MSI bar codes printed with the specified type check character, but will not
transmit the check character with the scanned data.
* Validate Type 10, but Don't
Transmit
Validate Type 10 and Transmit
7 - 25