Table of Contents
Advertisement
Safety Precaution
2.4 Inverter Installation
•
Do not apply mechanical load to the terminals, otherwise the terminals can be damaged.
•
All labels and warning marks should be visible after the installation. Do not scrawl, damage, or
cover any label on the device.
•
Inverters should not be installed in multiple phase combination.
•
Install the inverter away from high magnetic field to avoid electromagnetic interference.If there is
any radio or wireless communication equipment below 30MHz near the inverter, you have to:
•
Install the inverter at least 30m far away from the wireless equipment.
•
Add a low pass EMI filter or a multi winding ferrite core to the DC input cable or AC output
cable of the inverter.
•
Warning labels on the inverter are as follows.
DANGER High voltage hazard.
Disconnect all incoming power
and turn off the product before
working on it.
Read through the user manual
before working on this device.
High-temperature hazard. Do
not touch the product under
operation to avoid being burnt.
CE Mark
2.5 Personal Requirements
•
Personnel who install or maintain the equipment must be strictly trained, learn about safety
precautions and correct operations.
•
Only qualified professionals or trained personnel are allowed to install, operate, maintain, and
replace the equipment or parts.
DANGER
NOTICE
4
User Manual V1.1-2022-08-01
Delayed discharge. Wait 5
minutes after power off until
the components are completely
discharged.
Potential risks exist. Wear proper
PPE before any operations.
Grounding point.
Do not dispose of the inverter as
household waste. Discard the
product in compliance with local
laws and regulations, or send it
back to the manufacturer.
Advertisement
Table of Contents
