Playback - Philips EXPLORER VKR6847 Operating Instructions Manual

Playback
Preparation
• Insert the recorded cassette.
• Turn the Camcorder on and set the CAMERA/VCR
selector cover to "VCR".
Operations
-| Playback : Press the PLAY (►) button
2 Cue playback : Keep the E) /FWD button pressed
during playback.
0 Review playback: Keep the REV/0) button pressed
during playback.
Still playback : Press the PAUSE/STILL
(n)
button
during playback.
• To return to normal playback, press this button
again.
0 Press the STOP button (■) to finish playback.
Fast forward
Press the E> /FWD button to rapidly wind the tape
forward.
Rewind
Press the REV/® button to rapidly rewind the tape.
Tracking control
When picture is distorted by noise bars during playback,
the tracking needs to be adjusted.
-|
Press both the TRACKING ◄ and ► buttons
simultaneously.
2
Adjust the tracking with the TRACKING ◄ or
► buttons.
• When playing back a tape which has been
recorded on another Camcorder, it may not be
possible to completely eliminate this distortion.
• Noise which takes the form of horizontal bars
appears in the cue, review and still playback
modes. This is not an indication of a malfunction.
Notes:
•
The sound will be played back only during normal
playback.
• Playback: The tape will be rewound automatically
when it reaches its end.
• Fast Forward: The tape will stop automatically when it
reaches its end.
• Rewind: The tape will stop automatically when it
reaches its beginning.
• Still playback: If the Camcorder is left in this mode for
about 6 minutes
,
it will switch over to the stop mode
,
to protect the tape and video heads.
19