Philips EXPLORER VKR6847 Operating Instructions Manual page 13

Setting of the date and clock
When the DATE/TIME selector button is pushed, the
indication shown below will appear in the EVF.
0
:
12
1. 1. 1990
• If no battery is inserted, the indication
"BACKUP" will light up.
When the SHIFT button is kept pressed for more
than about 2 seconds, the "Year" portion will start
to flash. Then, at every press of the SHIFT button,
the items to be set will flash in the following
sequence.
Year -» Month
-*
Date -> Hour -> Minute
-*
Year -».
3
When the SET button is pushed, the flashing portion
displayed will be changed in the following
sequence.
YEAR: 2089 1990
MONTH: 1 2 .
DATE: 1 2 .
HOUR: 0 -> 1 .
MINUTE: 00 -> 01 .
-> 2089 -v 1990 -> ...
.-► 12 —> 1 —> ...
.—► 31 —> 1 —> ...
.-> 23 -> 0 ...
.. 59 -> 00 -> ..
• Repeat procedures 2 and 3 until all items have been
set.
• Once the time and date are set, press the SHIFT
button in response to a precise time signal so that the
clock may begin to function.
Recording the date/time Indications
When the DATE/TIME selector is pushed repeatedly, the
indications will change in the following sequence:
No indication Date and time Date
t_
>
11