Setting The Date And Time - Philips EXPLORER VKR6847 Operating Instructions Manual

Setting the date and time
How to insert the battery for the clock
operation
Notes:
•
This battery is necessary for the date and time, to be
memorized by the Camcorder.
•
If the battery is not inserted or if it is exhausted, the
indication "BACKUP" in the EVF will flash for
approximately 10 seconds when turning the
Camcorder on.
•
When replacing the battery while the time and date
indications are still correct, connect the Camcorder to
the AC adaptor for the duration of the battery
replacement so that the time will remain unchanged.
CAUTIONS FOR BATTERY REPLACEMENT
• The life of the battery is about one year. Inspect and if
necessary, replace the battery once a year.
• Load the new battery with its polarities (+ and -)
aligned correctly.
• Remove spent battery immediately and dispose of it.
• Do not try to short-circuit, recharge or heat the battery
and do not throw it into a fire.
Insert the "CR2032" size battery with polarities (+
and -) aligned correctly and then replace the lid.
10