18.2 Reading the alarms
The last three alarms stored in the FLASH memory of the PCB can be displayed:
•
Enter the diagnostic mode.
•
Irrespective of the type of PCB and the configuration, turn the programme
selector dial clockwise to the tenth position.
•
The last alarm is displayed.
•
To display the previous alarms, press the button to the left of the START/PAUSE
button in sequence (as shown in the figure).
•
To return to the last alarm, press the START/PAUSE button
Technical Support - DMM
Z 3
62/124
Z 6
599 75 58-67 Rev.04