Table of Contents
Advertisement
21.4 Heating element
•
When replacing the heating element, please refer to the code shown in
the list of spare parts relating to the appliance.
•
It is strictly forbidden to tamper with the heating element in any way!!!
(e.g. replace the NTC probe, etc...)
21.4.1 General characteristics
The heating element of the washing water is armoured, i.e. it is inserted in sealed tubular stainless steel casing.
It is powered by two relays (K1, K2) located on the circuit board. It is fitted with two thermal fuses which trip if
the temperature of the heating element exceeds the values for which they were calibrated.
1. Main circuit board
11. Heating element
Technical Support - DMM
83/124
599 75 58-67 Rev. 04
Advertisement
Table of Contents
