Makita RP1800 Instruction Manual page 9

Fine Adjusting Function for
Positioning Blade in Relation to
Straight Guide
1
► 1 . Adjusting screw
1. Loosen thumb nut (M6 x 50mm).
2. Thumb nut (M10 x 52mm) can be turned to adjust
position (one turn adjusts the position by 1mm).
3. After completing position adjustment, tighten
thumb nut (M6 x 50mm) until secure.
Scale ring can be rotated separately, so scale unit can
be aligned to zero (0).
Guide Shoe Width Alteration
Loosen the screws marked by the circles to alter the
width of the guide shoe in the left and right directions.
After altering width, tighten the screws until they are
secure. Guide shoe width (d) alteration range is 280mm
to 350mm.
1
2
► 1 . Screws 2. Movable
1. When set to minimum opening width
2. When set to maximum opening width
Templet guide (optional accessory)
The templet guide provides a sleeve through which
the bit passes, allowing use of the tool with templet
patterns.
9 ENGLISH
d