Table of Contents
Advertisement
Wipe and shake dust off the high performance
4.
prefilter and HEPA filter by hand.
Fig.32
Wash the high performance prefilter and HEPA
5.
filter in soapy water. Rinse and dry them thoroughly in
the shade before use.
Fig.33
NOTE: Avoid fastening the attachment end (rubber
sealing ring) of HEPA filter when hanging it up for
drying.
Attach the high performance prefilter onto the
6.
HEPA filter.
Fig.34
► 1. High performance prefilter 2. HEPA filter
1
2
13 ENGLISH
Hold the mounting end of HEPA filter (covered with
7.
high performance prefilter) and squeeze it back into the
cleaner body.
Fig.35
► 1. HEPA filter (covered with the high performance
prefilter) 2. Cleaner body
Sponge sheet
1.
Disassemble the cyclone unit from the cleaner
body.
Hold the mounting end of filter and pull it apart
2.
from the cleaner body.
Fig.36
► 1. Filter 2. Cleaner body
Pull the sponge sheet off from the suction
3.
opening.
Fig.37
► 1. Sponge sheet 2. Suction opening
1
2
1
2
2
1
Advertisement
Table of Contents
