Panasonic EY6812 Service Manual page 3

Model EY6812
Ref. No. 3A Procedure lA 2A -► 3A
Clutch gear
Removal of the intermediate shaft block.
1. Remove the piston and hammer block from
the intermediate shaft block.
NOTE: This block serves in switching the tool
from hammer to drill mode.
Bearing
Ref. No. 4A Procedure lA -► 2A -► 3A 4A
Removal of the piston and hammer block.
i. Remove the piston from hammer.
NOTE : Air compressed by the piston drives
hammer. T^e care to protect the piston
and hammer from contamination by dust.
Universal cafiling
Motor
Piston / O-ring
1
\ / Exhaust hole I Hammer
Piston and hammer block
Pinion
- 3 -